Fauna Marin Ultra Phos 5500ml
by Fauna Marin
Original Price $209.99
Current Price $178.49
Ultra-Phos is a new aluminium based adsorber which safely removes phosphates and humic substances from the aquarium. The pollutants are bound to the surface of Ultra Power-Phos and will not be released again.
Ultra Power-Phos can maintain very low nutrient concentrations in your tank. Unwanted Algae growth will be stopped and corals will show their natural colours.
Keep away from children.
Not to be used for animals used for food production.
Do not inhale, do not swallow.
Avoid contact with skin and eyes.
Instructions and Dosing recommendation
Please do all changes in the aquarium carefully and slowly. Start with 50 gr per 200 L / 50 gal. of water. After 14 days the dose can be increased up to 100 gr per 200 L / 50 gal. of water, do NOT overdose!
Check phosphate concentration regularly with reliable test kits, e.g. from Salifert, Macherey & Nagel, or Merck/Rowa.
In case the PO4 level starts to increase again, exchange Ultra-Phos for fresh material. Do not use more than 100 g (3.5 oz) per 200 L (50 gal). We recommend to place the material in a filter chamber with high flow, only there it will provide its maximum performance.
In case of extremely low PO4 levels and non-detectable Nitrate levels Ultra-Phos should not be used.
Ultra-Phos is extremely strong and suitable for tanks with a high nutrient load. Ultra-Phos also removes unwanted organic compounds and yellowness. In tanks with high organic load (yellowish water) it may take a little while before the PO4 reduction becomes measurable. This is a normal process, you will notice the color change of the Ultra-Phos from white to yellow and the much clearer water in the aquarium.
For a slower adsorption rinse the filled filter bag with osmotic water before use. To obtain best results and maximize adsorbtion efficiency, place the material between two layers of filter wool or use a fluidized-bed-reactor.
In case you use the material in a fluidized bed reactor, please consider the much higher efficiency of the material. Reduce the amount of Ultra-Phos by 50 % and carefully control the flow through the filter.
Ultra-Phos will become warm, when first immersed in water. Do not rinse the material.