Reef Supplies Ray’s Reefer 350 Build Part 2. Loc-line return mod

Hello everyone,

Welcome to part 2 of the Reefer 350 build!

My next update will be to modify the stock Reefer return into a split dual with loc-line. The stock return has a single output, there is noting wrong with that but I wanted a dual to be ale to direct the flow as I please. Besides, I cant leave well enough alone!

This is the stock set up with out-put removed.

I used a Loc-Line 1/2 inch Ball Socket x MPT Connector. All you need to do is line the threads with enough teflon tape so that the fitting tightly presses into the Red Sea return as seen below.

Easy enough! All you need now is a 1/2 inch Ball Socket Y , a 1/2 inch Ball Socket Flexible Tube – 6″ (use 3″ for each side) and a couple of  1/2″ flares

Here is the finished product.

Build Part 1. Reefer 350

Build Part 2. Loc-line return mod

Build Part 3. Manifold / Reactor build

Build Part 4. Aquascaping & sand

Build Part 5. Maxspect Ethereal & Heating – Ray’s Reefer 350 build part 5

Build Part 6.Full Tank Shots  – Ray’s Reefer 350 build part 6

Happy reefing!
Ray

Comments

comments